Shade Carrier for unsupported lamp shades
Brand: Endon Lighting
Product Description:
The Shade carrier is intended for use where the shade has only a supporting ring, high in the shade and in this case the shade rests (unattached) on the top of a shade carrier, this allows the height of the shade to be adjusted relative to the lampholder, a good rule of thumb being that the bottom of the shade should be level with the bottom of the lamp holder.
The shade carrier comes in a range of sizes from 5 inches to 9 inches this refers to the height from the lampholder ring to the support for the shade on a nominal basis (may vary by a few mm). The lampholder ring is 1 1/8 inches (29mm) internal diameter and designed for a standard UK bayonet connector lampholder (not suitable for ES lampholders) the top is intended for a shade ring that is 4 3/8 inches (110mm) inside.
Max Wattage: N/A IP Rating: N/A Lamp Holder: N/A Bulbs Included: No Shade Carrier Needed: No
| Ref | Status | Details | £ Price (GBP) | |
|---|---|---|---|---|
| ELSC5 |  |
Endon 5" Shade Carrier for unsupported lamp shades (12.5 cm) | 2.42 | |
| ELSC6 | |
Endon 6" Shade Carrier for unsupported lamp shades (15cm) | 2.42 | |
| ELSC7 | |
Endon 7" Shade Carrier for unsupported lamp shades (17.5 cm) | 2.42 | |
| ELSC9 | |
Endon 9" Shade Carrier for unsupported lamp shades (22.5 cm) | 2.69 | |
|
Endon Hand Made Square Shade CHANEL 12 
|
£25.9
(was £35) |
|
Endon 1 Lamp Flush Fitting- 392-1CH
|
£18.5
(was £25) |
|
Endon Hand Made Shade - DAISY 14
|
£33.3
(was £45) |
|
Endon Dark Wood Table Lamp- 0132 TLDW
|
£38.48
(was £47.97) |
|
|
Endon Non Electric Pendant for Existing Lampholder NE 61
|
£16.28
(was £22.55) |
There are currently no reviews for this product.
